The Sequre SQ-001 soldering iron is very similar to the very popular TS100 with all the same features and quality but at a more wallet friendly price.
The Sequre SQ-001 Portable soldering iron has a XT60 connector so it can be easily powered in the field using a 3s to 6s lipo , heat up times are slightly quicker with 6s than 3s for example running 12v supply it will take approx 40 secs to heat up to 300 degrees where using 6s will bring this down to around 11 seconds.
It also has a nice OLED screen and parameters are easily changed such as temperature and firmware updates.
The tips are similar again to the TS100 and use ceramic core technology which means the heat transfer to the soldering tip is very quick and precise and little heat is lost down the shaft like traditional soldering tips.
Ours come with the most precise 0.2mm I-Tip for precision soldering of miniscule contacts on micro FCs, VTX joints and Battery Terminals.
SQ-001 is based on 304 stainless steel nested ABS + PC shell, Integrated special power interface, Safety circuit design, Antistatic structure.
The perfect combination of embedded STM32 processor, dual temperature sensor and acceleration transmitter.
Make SQ-001 realize intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other functions.
The heating end adopts internal heating core
Factory preset temperature: 300 ℃
Temperature stability range: ± 2%
External independent power supply: DC 5525 power interface, suitable for DC 12-24v notebook power supply, vehicle power supply and mobile power supply.
Micro USB interface: set temperature rise curve, user defined function key and firmware upgrade function through parameter file.
1 x SQ-001 Controller (Blue)
1 x Solder Tip ( Default TS-I tip）
1 x Safety Instructions
1 x Hex Key
1 x User Manual
1 x DC5525 XT60 Power Cable
1 x Mini-bakelite Stand Holder
SEQURE Mini SQ-001 Portable Soldering Iron 65W XT60 WITH "TS-I" Tip (BLUE)
1. Please use ground clamp, proper power supply and other accessories to ensure safe use.
2. When SQ-001 is used for the first time, it may slightly smoke due to heating of electric heating element, which is normal Phenomenon.
3. If SQ-001 is used continuously for more than 350 ° C for 40 minutes, the handle temperature of soldering iron will reach 50°C~60°C.
4. When SQ-001 temperature rises, do not contact the iron head to avoid scalding.
5. When SQ-001 is powered on, the iron head cannot be replaced.