200, Jalan Sultan, #02-36A, Textile Centre, Singapore 199018 (Tel) : +65 62933968 / Operating Hours : (Mon-Fri 12pm-7pm) / (Sat & Eve of PH 12pm-6pm) / Sundays Close

Home

Email

facebook

Twitter

Youtube

Visit our Shopfront







 



back > Scale Drones
ITEM
Description
Price
Tie-Advance
(3D- Printed Scale Model Kit)




DARTHVADER's Tie-Advance
"For every TIE fighter you shoot down, a thousand more will take its place." -DBaron Soontir Fel

Darth Vader's TIE Advanced x1 was a starfighter used by Darth Vader during the Galactic Civil War, leading Black Squadron, and flown by him during the Battle of Yavin. It was a modified early prototype of the TIE Advanced x1 line.

Based on the detailed scale replica of the famous STARWARS "Tie-Advance", this model replica has made everyone's childhood dreams come true. Experience the scale flying of the Tie-Advance as the leader of the Imperial Force with the detailed printing of the exterior and spacious installation space for your Flight Controllers and ESCs.

Designed by our good friend PETER SORGEN from Switzerland, this model was designed specially for 5-inch setup from our usual racing drone. Due to its extra masses, we would expect the total flying weight to be above 800g. However after our first test-flight, we were pleasantly surprised that the extra masses has contributed to a better stability for scale-flying.

This model requires a large print-bed with minimum 280mm across and requires separate parts print and manual assembly. Some glueing is required.

Features:
- Fully 3D Printed with explicit details
- Wing Grills with holes to reduce drag
- Fully Air-Brushed by hand (Optional)
- Pre-Assembled (can be dismantled prior to electronic installations)

Recommended Setup:

Motor : 2205 (2300KV-2500KV)
ESC : 30A BLHeli_S
Battery : 4S 14.8V Lipo (1300-1550mAh)
Propellers : HQProp 5-inch (3-4 blades)

OPTIONAL Choices:
- Body Only (Unpainted)
- Body Only (Painted - Airbrushed)
- BNF (Bind-To-Fly) Radio & Lipo Batteries not included

Note:
This is not a mass-production kit. This 3D-Printed Kit is based on personalised Print-On-Demand and extensive man-hours & labour for printing and air-brushing is put into every kit ordered. Please allow approx 5-7 days for delivery upon your order. Thank you.




NOTE!!!

This Kit is not suitable for beginners as it is not a ready-to-fly kit.
Assembly & Radio Setup required.

SGD$250.00
(Body Only)
UNPAINTED


SGD$330.00
(Body Only)
PRE-PAINTED



SGD$490.00
(BNF)
- BindToFly
- 4 Motors
- 4 Props
- 4 ESCs
- Flight Controller
- LED for Cockpit

- Assembly included (with SBus port)























Tie-Fighter
(3D- Printed Scale Model Kit)



IMPERIAL Tie-Fighter
"For every TIE fighter you shoot down, a thousand more will take its place." -DBaron Soontir Fel

Based on the detailed scale replica of the famous STARWARS "Tie-Fighter", this model replica has made everyone's childhood dreams come true. Experience the scale flying of the Tie-Fighter with the detailed printing of the exterior and spacious installation space for your Flight Controllers and ESCs.

Designed by our good friend PETER SORGEN from Switzerland, this model was designed specially for 5-inch setup from our usual racing drone. Due to its extra masses, we would expect the total flying weight to be above 800g. However after our first test-flight, we were pleasantly surprised that the extra masses has contributed to a better stability for scale-flying.

This model requires a large print-bed with minimum 260mm across and requires separate parts print and manual assembly. Some glueing is required.

Features:
- Fully 3D Printed with explicit details
- Replaceable Winglets
- Wing Grills with holes to reduce drag
- Fully Air-Brushed by hand (Optional)
- Pre-Assembled (can be dismantled prior to electronic installations)

Recommended Setup:

Motor : 2205 (2300KV-2500KV)
ESC : 30A BLHeli_S
Battery : 4S 14.8V Lipo (1300-1550mAh)
Propellers : HQProp 5-inch (3-4 blades)
FPV Upgrade : YES (via FPV Pod at the bottom)

OPTIONAL Choices:
- Body Only (Unpainted)
- Body Only (Painted - Airbrushed)
- BNF (Bind-To-Fly) Radio & Lipo Batteries not included

Note:
This is not a mass-production kit. This 3D-Printed Kit is based on personalised Print-On-Demand and extensive man-hours & labour for printing and air-brushing is put into every kit ordered. Please allow approx 5-7 days for delivery upon your order. Thank you.


NOTE!!!

This Kit is not suitable for beginners as it is not a ready-to-fly kit.
Assembly & Radio Setup required.

SGD$190.00
(Body Only)
UNPAINTED


SGD$270.00
(Body Only)
PRE-PAINTED



SGD$450.00
(BNF)
- BindToFly
- 4 Motors
- 4 Props
- 4 ESCs
- Flight Controller
- LED for Cockpit

- Assembly included (with SBus port)














Counter