|
ITEM
|
Decription
|
Price
|
|
|
MULTIPLEX
Park Master 3D
Material : ELAPOR
Pre-fabricated molded ELAPOR® foam parts. Fully
3-D capable. Ultra Low Wing Loading. Ideal for Honing
Your 3D skils
Kit contents:Molded ELAPOR® parts, Carbon Fiber
/ Glass Filled Plastic Spars and fuselage longerons,
all plastic parts required to assemble the model, small
items and linkage components, decal sheet, detailed0
instructions.
Wing Length: 39 in.
Wing Area: 450 Sq. In.
Wing Loading: 6.7 oz/sq ft.
Fuselage Length: 40 in.
Motor: 200+ watt 28mm Outrunner (not included)
Battery: 3S 950 mAh LiPo (not included)
Speed Control: 17 - 27 amp (not included)
Weight (English): 21 oz.
Flight Characteristics: 3D Aerobatics
Target User: Advanced-Intermediate |
|
|
|
|
KT
CAP232
INDOOR/PARKFLYER FOAMIE
(Pre-painted ARF Depron Kit Only)
Wingspan:920mm
Weight: 100g
Weight(battery included) : 310g
Wing Area: 17dm2
Wing Loading: 18.3g/ dm2
Radio required : 4 Channel min. / 4 servos
(2 Ailerons / 1 Elevator / 1 Rudder)
Comes with carbon reinforcement strips
DIY
COMBO (SGD$149)consist of:
KT CAP232 Foam KIT x 1
Micro Servos x 4
Waypoint E2205/32 Motor x 1
Waypoint 10A Brushless ESC x 1
800mAh 2S1P 7.4V Lipo x 1
Electronics not included
|
|
WATCH Video
demo... |
|
|
Download
Assembly Manual-pdf |
|
|
|
|
|
KT
AVIATOR EDGE540-3D
INDOOR/PARKFLYER FOAMIE
(Pre-painted ARF Depron Kit Only)
Wingspan:920mm
Weight: 100g
Weight(battery included) : 310g
Wing Area: 17dm2
Wing Loading: 18.3g/ dm2
Radio required : 4 Channel min. / 4 servos
(2 Ailerons / 1 Elevator / 1 Rudder)
Comes with carbon reinforcement strips
DIY
COMBO (SGD$149)consist of:
KT CAP232 Foam KIT x 1
Micro Servos x 4
Waypoint E2205/32 Motor x 1
Waypoint 10A Brushless ESC x 1
800mAh 2S1P 7.4V Lipo x 1
Electronics not included
|
|
WATCH Video
demo... |
|
|
Download
Assembly Manual-pdf |
|
|
|
|
|
HP-EPSNIP3D
HYPERION SNIPER 3D
EPP FOAM
The new SNIPER 3D, is made in the Czech Republic for
Hyperion by Hacker Model Production, and was designed
by F3A Indoor/Outdoor pilot David Kyjovsky. It is one
super-sharp aerobatic model, and larger-than-average
size gives you the edge in stability. Pictorial-Text
instructions are included. The recommended power set
for the SNIPER is Hyperion Z2213-20 motor, TITAN 20A
ESC
|
|
|
|
HP-EPFLOAT500
FOR SNIPER 3D
Length : 500mm (19.7")
Max Width : 49mm (1.9")
Weight Floats : 18g each (0.64oz)
Weight Gear : 20g total (0.71oz)
Also suitable for other models between 350~550g (12~18oz)
Suitable for grass patch landing / takeoff |
|
|
|
|
HP-EPSTREG**
P-51 MUSTANG, EPP RENO RACER
EPP FOAM
These Super-Tough EPP Reno Racers are made exclusively
for Hyperion, by Hacker Model of the Czech Republic.
They just couldn't be more fun! Get the Hyperion Z2209-26
SET06 and install a 7x5 APC E prop with 3S pack (800~950mAh)
for Pylon Battles with your friends, or peel off anytime
for some wild aerobatics. These light models don't really
need 3S for superb performance, by the way. A 950mAh
2S pack and 8x6" prop provides plenty of power for verticals
and hovering.
|
|
|
|
|
HP-EPRAREB**
HYPERION BEAR CAT, EPP RENO RACER
EPP FOAM
These Super-Tough EPP Reno Racers are made exclusively
for Hyperion, by Hacker Model of the Czech Republic.
They just couldn't be more fun! Get the Hyperion Z2209-26
SET06 and install a 7x5 APC E prop with 3S pack (800~950mAh)
for Pylon Battles with your friends, or peel off anytime
for some wild aerobatics. These light models don't really
need 3S for superb performance, by the way. A 950mAh
2S pack and 8x6" prop provides plenty of power for verticals
and hovering.
|
|
|
|
|
E-FLITE
Jenny JN-4 Slow Flyer ARF
(SEMI FOAM/BALSA SCALE KIT)
Wing Span: 32 in (810mm)
Overall Length: 26 in (660mm)
Wing Area: 304 sq in (19.6 sq dm)
Flying Weight: with Battery210–225g
without Battery: 195g
Motor Size: E-flite Park 250 2200 Kv
Radio: 3 channels with 2 super sub-micro servos (6-gram)
Prop Size: GWS 6x5 slow flyer (GWSEP6050B)
Speed Control :10A
Recommended Battery: 480mah 2-cell Li-Po Approx. Assembly
Time: 3 hours
|
|
|
|
|
E-FLITE YAK
54F KIT (Indoor/Outdoor)
Designed by QUIQUE SOMENZINI
Wing span : 940mm
Length :950mm
Weight :340-400g (w/Battery)
Wing Area :345 sq in (22.2 sq dm)
Recommended Motor:Park 370 / Park 400 motor Brushless
Outrunner, REVOX G2213/22 (not included)
Recommended ESC : Brushless 20-25A and above (not included)
Radio :4 channel with 3 sub-micro servos (not included) |
|
|
|
|
NEW MODEL FOR
2007!
AIRFOILZ THE BIPE (ARF KIT)
Wingspan: 34"
Length: 35.5"
Weight: 21-23 oz
Wing Area: 550 sq in
Wing Loading: 5.8 - 70 oz/sq ft
Recommended Motor:Revox G2217/16 (not included)
Materials : FOAM + PLY CONSTRUCTION
RC UNIVERSE REVIEW : Click
Here |
|
|
Back
to main page...
|
