SKY HOBBIES SINGAPORE

ACCESSORIES - PROP ADAPTORS
Back to ACCESSORIES MAIN PAGE

ITEM	Decription	Stock
O-Rings (for prop saver adaptors)
	O-RINGS (for Prop Savers) - Pack of 5 pcs - Internal Diameter : 14mm - Ring thickness : 2.3mm - Suitable for GWS / Slow Fly Props up to 10 inches	SGD$2.00 (pack of 5s)

PRECISON AEROBATICS PROP ADAPTORS (German CNC)
	PRECISION AEROBATICS German CNC Prop Adaptors T20 For 4mm Motor Shaft CNC machined precision propeller adapter. Specifically designed to match PA Thrust 20 motor. Made in Germany.	SGD$12.50

BULLET-TYPE PROP ADAPTORS
	CNC Prop Adaptor - COLLET Type Product Code : 0190202 Motor Shaft Diameter : 3.0mm Propeller Axle Diameter : 5.0mm Comes with CNC Nose Cone and Washer COLOUR : SILVER SAVE 15% when you buy bundle of 2!	SGD$6.00 SGD$10.20 BUNDLE OF 2 (2 pieces)

	CNC Prop Adaptor - COLLET Type Product Code : 0190203 Motor Shaft Diameter : 3.175mm Propeller Axle Diameter : 5.0mm Comes with CNC Nose Cone and Washer COLOUR : SILVER SAVE 15% when you buy bundle of 2!	SGD$6.00 SGD$10.20 BUNDLE OF 2 (2 pieces)

	CNC Prop Adaptor - COLLET Type Product Code : 0190204 Motor Shaft Diameter : 3.175mm Propeller Axle Diameter : 6.35mm Comes with CNC Nose Cone and Washer COLOUR : SILVER SAVE 15% when you buy bundle of 2!	SGD$6.00 SGD$10.20 BUNDLE OF 2 (2 pieces)

	CNC Prop Adaptor - COLLET Type Product Code : 0190205 Motor Shaft Diameter : 4.0mm Propeller Axle Diameter : 6.0mm Comes with CNC Nose Cone and Washer COLOUR : SILVER SAVE 15% when you buy bundle of 2!	SGD$6.00 SGD$10.20 BUNDLE OF 2 (2 pieces)

	CNC Prop Adaptor - COLLET Type Product Code : 0190208 Motor Shaft Diameter : 4.0mm Propeller Axle Diameter : 6.35mm Comes with CNC Nose Cone and Washer COLOUR : SILVER SAVE 15% when you buy bundle of 2!	SGD$6.00 SGD$10.20 BUNDLE OF 2 (2 pieces)

HYPERION PROP ADAPTORS & ACCESSORIES...
	HP-ADAP-23S Hyperion SHORT Collet ADAPTER M5 (SF) for 2.3mm shaft	SGD$5.60

	HP-ADAP-30L Hyperion LONG Collet ADAPTER M5 (EP) for 3.0mm shaft	SGD$6.00

	HP-ADAP-30S Hyperion SHORT Collet ADAPTER M5 (EP) for 3.0mm shaft	SGD$5.60

	HP-ADAP-32L Hyperion LONG Collet ADAPTER M5 (EP) for 3.2mm shaft	SGD$6.00

	HP-ADAP-32S Hyperion SHORT Collet ADAPTER M5 (EP) for 3.2mm shaft	SGD$5.60

	HP-ADAP-8-60XL This is a large, strong adapter for props in the 10" to 22" range, with 8mm center hole. Made to fit 6mm motor shaft and gearbox shafts, with suffcient length to mount large APC E and SPORT props, and also a spinner if desired. 3mm hole in end of adapter allows mounting of various spinners.	SGD$12.50

	HP-ADAPNUT-M5 Bullet Safety Nut to fit prop adapters with M5 Shaft. Tapered edges for spanner tool tightening. Note : This is a adaptor nut to tighten and secure the prop on the front. (Single Piece)	SGD$4.80

	HP-Z22-BKMNT Hyperion Z22 Series Backmount w/adapter with 16x19 Cross Mount for most outrunners with 3.2mm Prop Adaptor	SGD$6.30

	HP-Z30XX-BKMNT Backmount for Z/ZS30XX with prop shaft and screws	SGD$13.00

For M5/M6 Adaptor Shafts	HP-ADAP-PULL01 Hyperion Collet Adapter Puller for M5 and M6 Adapters For easy removal of jammed prop adapter from the the motor shaft. If you have ever faced not being able to slide off the collet adapter from the motor shaft, then this is your rescue. Quickly and easily, and without any damage to your motor shaft or model, you can pull off the prop backplate and slide the adapter off with no sweat.	SGD$19.00

For M8 Adaptor Shafts	HP-ADAP-PULL02 Hyperion Collet Adapter Puller for M8 Adapters For easy removal of jammed prop adapter from the the motor shaft. If you have ever faced not being able to slide off the collet adapter from the motor shaft, then this is your rescue. Quickly and easily, and without any damage to your motor shaft or model, you can pull off the prop backplate and slide the adapter off with no sweat.	SGD$24.00

Back to ACCESSORIES MAIN PAGE