|
ITEM
|
Decription
|
Price
|
Click above for full
image
|
FRSKY
2.4GHz
4CH Micro Receiver( V8R4)
ACCST (Advanced Continuous
Channel Shifting Technology)
FrSky lightweight
receiver is fit for 3D foamy and indoor slow flyers.
Weighing in at a scant 2.6 grams, FrSky V8R4 with
2.4GHz ACCST technology is the perfect receiver
for these types of applications.
Receiver specifications:
Operating Voltage Range: 4.8V-6V
Operating Current: =30mA
Specified Range: =500m
Weight: 2.6 g
Latency: 22ms
Number of Channels: 4CH
High-precision: 3072, error: ±1
Easy operation:Easy to bind, intuitive status
ACCST Technology
NOTE : Only use with
FRSKY 2.4GHz Modules! |
|
|
Click above for full
image
|
FRSKY
2.4GHz 8ch V8FR RECEIVER UNIT
ACCST
(Advanced Continuous Channel Shifting Technology)
Receiver specifications:
Operating Voltage Range: 4.8V-6V
Operating Current: 30mA
Specified Range:
1.2km
Resolution: 10bit
Latency: 22ms
Number of Channels:
8CH
Dimensions: 60×37×21
mm
NOTE : Only use with
FRSKY 2.4GHz Modules!
|
|
|
|
|
FUTABA R6106HFC
2.4Ghz RX
(CO-AXIAL ANTENNA - FOR
CARBON FRAMES)
The Futaba R6106HFC 2.4GHz FASST 6-Channel
Mid Range (600m) Receiver is ideal for use with
aircrafts with wingspan up to 1300mm and electric
helicopters with a rotor diameter of up to 1000mm.
Features:
•Built-in coaxial antenna suitable for use
in a carbon fiber fuselage
•Works with 6EX, 7C, 10CG Futaba 2.4GHz FASST
Transmitters and TM7/TM8/TM10 2.4GHz modules
•Use with any servo in normal mode (16mS)
or digital servos in high speed mode (8mS)
•Working voltage: 3.3 to 8.5V
•Dimensions: 0.85 x 1.53 x 0.48" (21 x 39
x 12mm)
•Weight: 1/4 oz (7.1g) |
|
|
|
|
FUTABA
R6106HF
2.4Ghz RX
(SHORT ANTENNA - FOR FOAMIES
/ BALSA FRAMES)
The Futaba R6106HF 2.4GHz FASST 6-Channel
Mid Range (600m) Receiver is ideal for use with
aircrafts with wingspan up to 1300mm and electric
helicopters with a rotor diameter of up to 1000mm.
Features:
•Works with 6EX, 7C, 10CG Futaba 2.4GHz FASST
Transmitters and TM7/TM8/TM10 2.4GHz modules
•Use with any servo in normal mode (16mS)
or digital servos in high speed mode (8mS)
•Working voltage: 3.3 to 8.5V
•Dimensions: 0.85 x 1.53 x 0.48" (21 x 39
x 12mm)
•Weight: 1/4 oz (7.1g)
•A 7ms frame rate gives this receiver extremely
low latency, for virtually real-time response
•End pin design means quick and easy installation;
Easy Link™ does away with binding plugs
•Use with any servo in normal mode, or high
speed mode with digital servos
•Ideal for park flyers, indoor models and
helis up to 500 mm |
|
|
|
|
FUTABA
R6004FF-4 Channel 2.4Ghz RX
Introducing the all new R6004FF 2.4GHz
micro receiver. This high sensitivity receiver
weighs only .13oz (3.5g). There is no need to
buy separate receivers for specific aircraft.
These new 2.4GHz Futaba receivers are the most
rock solid receivers we have ever used in any
application. Completely “glitch free” systems.
The R6004FF FASST 4 (four) channel receiver is
designed for short range application such as indoor
use aircrafts, and can be linked to the transmitter
in seconds simply by pushing the Easy Link™ button.
It’s just one of the features that help 2.4GHz
FASST™ (Futaba Advanced Spread Spectrum Technology)
systems provide the most secure and dependable
RF link in R/C.
Receivers just don't get any lighter than this!
Specifications:
Channels: 4
Band: 2.4GHz
Conversion: FASST (Spread Spectrum)
Operating Voltage: 4.8-8.5 Volts
Battery F/S Voltage: 3.8V
Range: 300+ Feet
Antenna Length: 5"
Case Size: .81" x 1.39" x 0.30"
(20.5x35.3x7.5mm)
Weight: 0.13 oz. (3.5g)
Compatible with the following FASST transmitters:
6EX, 7C, and the following transmitter modules;
TM7, TM8 (on 7 channel mode), TM10 (on 7 channel
mode) and TM14 (on 7 channel mode). |
|
|
|
|
FUTABA
R617FS-7 Channel 2.4Ghz RX
The heart of the FASST system is the
R617FS receiver: there's no other 2.4GHz receiver
like it! Size and weight — The R617FS measures
40 x 27 x 9 mm and weighs just 7 grams without
the case...perfect for park flyers, but powerful
enough to easily control giant-scale models too.
It's the best of both worlds! Full-range capability
— The competition's full-range system includes
a bigger, two-piece receiver; a smaller park flyer
receiver must be purchased separately. The compact
R617FS unit offers “all-in-one” convenience! Antenna
stress relief — Unlike other receivers, the R617FS
uses rubber grommets to minimize stress on the
antennas. This helps prevent the antenna wire
from fraying, and possibly putting your model
at risk. Installation ease — The single R617FS
unit can be installed without making any modifications. |
|
|
|
|
3A
EXTERNAL BEC (Switching)
Input: Use only 2-cell lipo (7.4V lipo)
Input connector : JST Female included
Output: 5.0V/6.0V
Current capability: 3A
Dimension: 20X30X7mm
Weight: 9g
Applications : EP Plane, Heli, 1/8GP and 1/10GP
|
|
|
|
|
DYNAM
R-6P Receiver (FUTABA/35Mhz)
Type: FM for Futaba
Channel: 6 Channel
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:35MHz
Weight:8.8g
Dimensions:34x18x10mm
Current Drain:13mAh
Antenna Length:100cm
Certificate:CE,FCC
FM Single Conversion Crystal not included |
|
|
|
|
DYNAM
R-6P Receiver (JR/35Mhz)
Type: FM for JR
Channel: 6 Channel
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:35MHz
Weight:8.8g
Dimensions:34x18x10mm
Current Drain:13mAh
Antenna Length:100cm
Certificate:CE,FCC
FM
Single Conversion Crystal not included
|
|
|
|
|
DYNAM
R-6P Receiver (FUTABA/72Mhz)
Type: FM for Futaba
Channel: 6 Channel
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:72MHz
Weight:8.8g
Dimensions:34x18x10mm
Current Drain:13mAh
Antenna Length:100cm
Certificate:CE,FCC
FM
Single Conversion Crystal not included
|
|
|
|
|
DYNAM
R-6P Receiver (FUTABA/40Mhz)
Type: FM for Futaba
Channel: 6 Channel
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:40MHz
Weight:8.8g
Dimensions:34x18x10mm
Current Drain:13mAh
Antenna Length:100cm
Certificate:CE,FCC
FM
Single Conversion Crystal not included |
|
|
|
|
DYNAM
R-6P Receiver (JR/40Mhz)
Type: FM for JR
Channel: 6 Channel
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:40MHz
Weight:8.8g
Dimensions:34x18x10mm
Current Drain:13mAh
Antenna Length:100cm
Certificate:CE,FCC
FM
Single Conversion Crystal not included |
|
|
|
|
GWS
R-6NII NARO FM Receiver
35/40/72
Mhz
Ant length:50cm (20"in)
Weight:7.6~8.2g (0.27~0.29 oz)
Micro Crystals not
inclusive
No servo jitter when the transmitter is switched
off
GWS also improved the receiving sensitivity and
the interference rejection, so the new R-6NII
receiver's performance is like the R-8M receiver.
GWS Micro Crystal also available at $15.00 each.
Please email us for frequencies available. |
|
|
|
|
Product Name: Dynam 6 Ch FM Receiver
72
Mhz
Description:6 CH
Receiver
Type: FM
Channel: 6Channel
BAT:1.5*2A*4cell
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Weight:11g
Dimensions:42X23X13mm
Current Drain:13mA
COLOR:Black
ANT Length:100cm
Certificate:CE,FCC
Crystal not inclusive
|
|
|
Back
to home page...
|
