|
FRSKY
2.4Ghz System Solutions
|

Click above for full image
|
FRSKY
2.4GHz V8 8ch system
FUTABA COMBO (TX Module + 4 Channel Micro Receiver)
ACCST
(Advanced Continuous Channel Shifting Technology)
Advanced Continuous
Channel Shifting Technology ( ACCST SYSTEM)
Universal transmitter and receiver for
all 4ch to 8ch controllers.
Quick and
precise channels.
Error-free
Digital link.
Low power
consumption.
Supports
the multiple controls by a single controller.
Supports
the simultaneous use of multiple devices without
mutual interference.
Extended
operating range (1.2km)
Instant Signal recovery!
Transmitter Module is compatible with
the following transmitters:
FUTABA: 7U, 8U,
8J, 9C, 9Z and FN series.
HITEC: Optic 6, Eclipse 7.
WFLY: WFT 09, WFT 08.
RCMODEL REVIEW : CLICK
HERE
|
|
|

Click above for full image
|
FRSKY
2.4GHz V8 8ch system
JR COMBO (TX
Module + 4 Channel Micro Receiver)
ACCST
(Advanced Continuous Channel Shifting Technology)
Advanced Continuous
Channel Shifting Technology ( ACCST SYSTEM)
Universal transmitter and receiver for
all 4ch to 8ch controllers.
Quick and
precise channels.
Error-free
Digital link.
Low power
consumption.
Supports
the multiple controls by a single controller.
Supports
the simultaneous use of multiple devices without
mutual interference.
Extended
operating range (1.2km)
Instant Signal recovery!
JR : 347 / 388 / 783 / U8 / PCM10 / PCM10S
/ PCM10SX / PCM10IIS / 8103 / J9303 / MX-22
/ MX-24S / PX / 9XII
RCMODEL REVIEW : CLICK
HERE
|
|
|

Click above for full image
|
FRSKY
2.4GHz V8 8ch system
FUTABA COMBO (TX Module + 8 Channel V8FR Receiver)
ACCST
(Advanced Continuous Channel Shifting Technology)
Advanced Continuous
Channel Shifting Technology ( ACCST SYSTEM)
Universal transmitter and receiver for
all 4ch to 8ch controllers.
Quick and
precise channels.
Error-free
Digital link.
Low power
consumption.
Supports
the multiple controls by a single controller.
Supports
the simultaneous use of multiple devices without
mutual interference.
Extended
operating range (1.2km)
Instant Signal recovery!
Transmitter Module is compatible with
the following transmitters:
FUTABA: 7U, 8U,
8J, 9C, 9Z and FN series.
HITEC: Optic 6, Eclipse 7.
WFLY: WFT 09, WFT 08.
RCMODEL REVIEW : CLICK
HERE
|
|
|

Click above for full image
|
FRSKY
2.4GHz V8 8ch system
JR COMBO (TX
Module + 8 Channel V8FR Receiver)
ACCST
(Advanced Continuous Channel Shifting Technology)
Advanced Continuous
Channel Shifting Technology ( ACCST SYSTEM)
Universal transmitter and receiver for
all 4ch to 8ch controllers.
Quick and
precise channels.
Error-free
Digital link.
Low power
consumption.
Supports
the multiple controls by a single controller.
Supports
the simultaneous use of multiple devices without
mutual interference.
Extended
operating range (1.2km)
Instant Signal recovery!
JR : 347 / 388 / 783 / U8 / PCM10 / PCM10S
/ PCM10SX / PCM10IIS / 8103 / J9303 / MX-22
/ MX-24S / PX / 9XII
RCMODEL REVIEW : CLICK
HERE
|
|
|

Click above for full
image
|
FRSKY
2.4GHz
4CH Micro Receiver( V8R4)
ACCST (Advanced Continuous
Channel Shifting Technology)
FrSky lightweight
receiver is fit for 3D foamy and indoor slow flyers.
Weighing in at a scant 2.6 grams, FrSky V8R4 with
2.4GHz ACCST technology is the perfect receiver
for these types of applications.
Receiver specifications:
Operating Voltage Range: 4.8V-6V
Operating Current: =30mA
Specified Range: =500m
Weight: 2.6g
Latency: 22ms
Number of Channels: 4CH
High-precision: 3072, error: ±1
Easy operation: Easy to bind, intuitive status
Dimension: 34.5x19.5x8mm
ACCST Technology
NOTE : Only use with
FRSKY 2.4GHz Modules!
RCMODEL REVIEW
: CLICK
HERE
|
|
|
|
|
FRSKY
2.4GHz 7CH MICRO RECEIVER UNIT (V8R7)
ACCST
(Advanced Continuous Channel Shifting Technology)
Operating Voltage Range:
4.8V-6V Operating Current: 30mA
Specified Range: 1.5km-2.5km
Resolution: 3072
Latency: 22ms
Number of Channels: 7CH
Specified: V8R7
Weight : 7.5g
Dimensions: 40×21×10 mm
Easy operation:Easy to bind, intuitive status
ACCST Technology
NOTE : Only use with
FRSKY 2.4GHz Modules!
RCMODEL
REVIEW : CLICK
HERE
|
|
|

Click above for full
image
|
FRSKY
2.4GHz 8ch RECEIVER UNIT (V8FR)
ACCST
(Advanced Continuous Channel Shifting Technology)
Operating Voltage Range:
4.8V-6V
Operating Current: 30mA
Specified Range: 1.5km-2.5km
Resolution: 3072
Latency: 22ms
Number of Channels: 8CH
Dimensions: 49.5x24.5x15mm
Weight: 14g
Easy operation:Easy to bind, intuitive status
ACCST Technology
NOTE : Only use with
FRSKY 2.4GHz Modules!
RCMODEL REVIEW : CLICK
HERE
|
|
|

Click above for full image
|
FRSKY
2.4GHz 2db TX Module Antenna
Replacement
-
We recommend you to choose Blister-Pack envelope
for your shipping option |
|
|

Click above for full
image
|
FRSKY
2.4GHz 5db TX Module Antenna
Replacement
-
We recommend you to choose Blister-Pack envelope
for your shipping option |
|
|
|
FUTABA
|
|
|

FUTABA
6EX - 6 CHANNEL 2.4GHz FASST SYSTEM
(R6106HFC)
The
simplest and most advanced 6-channel system available.
* Comes with
6EX 2.4Ghz Transmitter and R6106HFC 6 CHannel
2.4 FASST Receiver and Rechargeable TX Battery.
* Comes with TX Wall Charger
* Combines the features of both Airplane and Helicopter
programming functions!
* Servos not included
*** Comes with new R6106HFC
6-channel FASST Receiver |
|
|
|
|

FUTABA
6EX - 6 CHANNEL 2.4GHz FASST SYSTEM
(R617FS)
The
simplest and most advanced 6-channel system available.
* Comes with
6EX 2.4Ghz Transmitter and R617FS Receiver and
Rechargeable TX Battery.
* Comes with TX Wall Charger
* Combines the features of both Airplane and Helicopter
programming functions!
* Servos not included
*** Comes with new R617FS
7-channel FASST Receiver |
|
|
|
|

Futaba
7C 2.4Ghz 7ch Transmitter & R617FS Receiver w/
2 Batteries
(FOR
AIRPLANES)
The
simplest and most advanced 7-channel system available.
1 x Futaba T7CH
7ch 2.4GHz Transmitter
1 x Futaba R617FS 7ch 2.4GHz Receiver
1 x 9.6V 600mAh NiCd Rechargable Battery for Transmitter
(NT8S600B)
1 x 4.8V 600mAh NiCd Rechargable Battery for Receiver
(NR-4J)
1 x On/Off switch with cables
1 x Battery Charger (230V Oplader)
1 x English Manual
* Servos not included
*** Comes with new R617FS
7 channel FASST Receiver |
|
|
|
|

Futaba
10CHP 2.4Ghz 10ch Transmitter & R6014FS Receiver
w/ 2 Batteries
(FOR
HELICOPTERS)
The
simplest and most advanced 10-channel system available.
1 x T10CHP or
T10CAP Transmitter
1 x R6014FS 14ch
2.4GHz Receiver
1 x TM-10 2.4GHz
RF Module (5-pin)
1 x Wall Charger
FBC-18C(4) (230V)
1 x 700mAh Transmitter
Battery NT8S700B
1 x 1000mAh RX NiCD
Rechargable Battery
1 x NR-4RB On/Off
Switch Harness, FUTM4385
NOTE : This is a mudular system. You can use
the TM-10 module to fly 2.4GHz-equipped aircraft…or
replace it with a 29MHz module(TP-FM, the module
previously used on the FF7,FF8 and FF9), and fly
existing models without added equipment or expense.
*** Comes with new R6014FS
14channel FASST Receiver
|
|
|
|
|

Futaba
10CAP 2.4Ghz 10ch Transmitter & R6014FS Receiver
w/ 2 Batteries
(FOR
AIRPLANES)
The
simplest and most advanced 10-channel system available.
1 x T10CHP or
T10CAP Transmitter
1 x R6014FS 14ch
2.4GHz Receiver
1 x TM-10 2.4GHz
RF Module (5-pin)
1 x Wall Charger
FBC-18C(4) (230V)
1 x 700mAh Transmitter
Battery NT8S700B
1 x 1000mAh RX NiCD
Rechargable Battery
1 x NR-4RB On/Off
Switch Harness, FUTM4385
NOTE : This is a mudular system. You can use
the TM-10 module to fly 2.4GHz-equipped aircraft…or
replace it with a 29MHz module(TP-FM, the module
previously used on the FF7,FF8 and FF9), and fly
existing models without added equipment or expense.
*** Comes with new R6014FS
14channel FASST Receiver
|
|
|
|
|
|

FUTABA
R6004FF - 4 Channel 2.4 Ghz RX
Introducing the all new R6004FF 2.4GHz
micro receiver. This high sensitivity receiver
weighs only .13oz (3.5g). There is no need to
buy separate receivers for specific aircraft.
These new 2.4GHz Futaba receivers are the most
rock solid receivers we have ever used in any
application. Completely “glitch free” systems.
The R6004FF FASST 4 (four) channel receiver is
designed for short range application such as indoor
use aircrafts, and can be linked to the transmitter
in seconds simply by pushing the Easy Link™ button.
It’s just one of the features that help 2.4GHz
FASST™ (Futaba Advanced Spread Spectrum Technology)
systems provide the most secure and dependable
RF link in R/C.
Receivers just don't get any lighter than this!
Specifications:
Channels: 4
Band: 2.4GHz
Conversion: FASST (Spread Spectrum)
Operating Voltage: 4.8-8.5 Volts
Battery F/S Voltage: 3.8V
Range: 300+ Feet
Antenna Length: 5"
Case Size: .81" x 1.39" x 0.30"
(20.5x35.3x7.5mm)
Weight: 0.13 oz. (3.5g)
Compatible with the following FASST transmitters:
6EX, 7C, and the following transmitter modules;
TM7, TM8 (on 7 channel mode), TM10 (on 7 channel
mode) and TM14 (on 7 channel mode). |
|
|
|
|

FUTABA R6106HFC
2.4Ghz RX
(CO-AXIAL ANTENNA - FOR
CARBON FRAMES)
The Futaba R6106HFC 2.4GHz FASST 6-Channel
Mid Range (600m) Receiver is ideal for use with
aircrafts with wingspan up to 1300mm and electric
helicopters with a rotor diameter of up to 1000mm.
Features:
Built-in coaxial antenna suitable for use
in a carbon fiber fuselage
Works with 6EX, 7C, 10CG Futaba 2.4GHz FASST
Transmitters and TM7/TM8/TM10 2.4GHz modules
Use with any servo in normal mode (16mS)
or digital servos in high speed mode (8mS)
Working voltage: 3.3 to 8.5V
Dimensions: 0.85 x 1.53 x 0.48" (21 x 39
x 12mm)
Weight: 1/4 oz (7.1g) |
|
|
|
|

FUTABA
R6106HF
2.4Ghz RX
(SHORT ANTENNA - FOR FOAMIES
/ BALSA FRAMES)
The Futaba R6106HF 2.4GHz FASST 6-Channel
Mid Range (600m) Receiver is ideal for use with
aircrafts with wingspan up to 1300mm and electric
helicopters with a rotor diameter of up to 1000mm.
Features:
Works with 6EX, 7C, 10CG Futaba 2.4GHz FASST
Transmitters and TM7/TM8/TM10 2.4GHz modules
Use with any servo in normal mode (16mS)
or digital servos in high speed mode (8mS)
Working voltage: 3.3 to 8.5V
Dimensions: 0.85 x 1.53 x 0.48" (21 x 39
x 12mm)
Weight: 1/4 oz (7.1g)
A 7ms frame rate gives this receiver extremely
low latency, for virtually real-time response
End pin design means quick and easy installation;
Easy Link does away with binding plugs
Use with any servo in normal mode, or high
speed mode with digital servos
Ideal for park flyers, indoor models and
helis up to 500 mm |
|
|
|
|

FUTABA
R617FS - 7 Channel Receiver 2.4 Ghz
The heart of the FASST system is the
R617FS receiver: there's no other 2.4GHz receiver
like it! Size and weight — The R617FS measures
40 x 27 x 9 mm and weighs just 7 grams without
the case...perfect for park flyers, but powerful
enough to easily control giant-scale models too.
It's the best of both worlds! Full-range capability
— The competition's full-range system includes
a bigger, two-piece receiver; a smaller park flyer
receiver must be purchased separately. The compact
R617FS unit offers “all-in-one” convenience! Antenna
stress relief — Unlike other receivers, the R617FS
uses rubber grommets to minimize stress on the
antennas. This helps prevent the antenna wire
from fraying, and possibly putting your model
at risk. Installation ease — The single R617FS
unit can be installed without making any modifications. |
|
|