SKY HOBBIES SINGAPORE

ITEM

Decription

Price

KDS POWER RC-6S
Lithium polymer LCD balance charger & discharger

Specifications:
Operating voltage range: DC 11.0- 16.0V
AC 100- 240, -50/ 60 HZ 12V DC 5A adaptor (included)

Max. charge power: 50W
Max. discharge power: 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
NiCd \ NiMH battery cell count: 1-15cell
li-ion \ Polymer cell count: 1-6 series ( Note: support Li-Fe battery, i.e. A123)
Pb battery voltage: 2-20V
JST-XH Balancer Slots : 2S-6S

What's Included:
Comes with 12V 5A DC Adaptor power supply
Comes with clear cover Aluminum Case.
Charging cables with crocodile clips included
Charging cables includes JST / DEANS / 4.0mm Banana jack/ 12V DC Plug

CLICK DATASHEET TO READ MORE

Hyperion EOS 0403i DC Charger
(2-4 cell lipo with LBA Balancer)

•11-15V input
•Lipo 1S-4S
•A123 1S-4S
•Integrated LBA balancer incl. multi-adapter
•One output harness wtih 4mm gold bullet connectors included (#HP-EOSOUTCORD)
•Clear and Easy to read LCD display
•Rugged aluminum casing

CLICK DATASHEET TO READ MORE

BUILT-IN LBA10 BALANCER!
"AC/DC"

Hyperion EOS 0606i AD "C" VERSION
6S 6A max CHARGER AC/DC
(2-6 cell lipo with LBA10 Balancer)

•220V AC or 11V-15V DC Input
•Lipo 1S-6S / A123 1S-6S / NiCd/NiMH 1-14cells /Lead-Acid 1-6cells
•Data Output Port
•Charge/Discharge modes
•Cycling Mode for NiCd/NiMH
•2-line, 16 character, easy-to-read LCD Screen
•220V cable included (not depicted)
•Safety Smart
•Charge Rates 0.1A~6.0A

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
Mid April
(with new reduced prices)

Click to see full image

Hyperion EOS 0606i 6S 6A 50W max CHARGER "B" Version
(2-6 cell lipo with LBA10 Balancer)
•Lipo 1S-6S / A123 1S-6S / NiCd/NiMH 1-14cells /Lead-Acid 1-6cells
•PC Data Output Port
•Charge/Discharge modes
•Cycling Mode for NiCd/NiMH
•2-line, 16 character, easy-to-read LCD Screen
•Packaged in a rugged aluminum case
•11V-15V DC Input only

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
Mid April
(with new reduced prices)

NEW Hyperion EOS 0615i DUO3
•EOS 0615i DUO3 DC INPUT 11V~28V
•6S Max, 180W 15A Max Charge Per Port , 50W+50W 10A Discharge
•SYNC Charge up to 2x6S for max 12S Flightpacks at 360W max.

DUO3 changes vs. previous DUO2:
- 12-Bit Balance Circuit Resolution for superb accuracy
- Built-In USB DataPort and supplied USB cable
- Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.)
- 20 Memory slots for batteries per port (40 total)
- CYCLE mode for LiFePO4 and LiPo
- Max Current per port raised from 10A to 15A

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
End MARCH
(with new reduced prices)

NEW Hyperion EOS 0615i DUO3
COMBO SET WITH 40A PSU
COMBO With new 40A POWER SUPPLY UNIT
•EOS 0615i DUO3 DC INPUT 11V~28V
•6S Max, 180W 15A Max Charge Per Port , 50W+50W 10A Discharge
•SYNC Charge up to 2x6S for max 12S Flightpacks at 360W max.
• Comes with 40A USB Power Supply Unit
(See below for more info on Power Supply)

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
End MARCH
(with new reduced prices)

NEW - Hyperion EOS 0720i NET3 charger - 7S, 20A max, 250W
•EOS 0720i NET3 DC INPUT 11V~28V
•7S 250W 20A! max Charge, 80W/10A max Discharge
•SYNC capable - Charge up to 2x7S for max 14S Flightpacks at 500W max.

NET3 changes vs. previous 0720i NET:
- 12-Bit Balance Circuit Resolution for superb accuracy
- Built-In USB DataPort and supplied USB cable
- Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.)
- 20 Memory slots for batteries
- CYCLE mode for LiFePO4 and LiPo

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
End MARCH
(with new reduced prices)

NEW - Hyperion EOS 0720i NET3 charger - 7S, 20A max, 250W
COMBO SET WITH 40A PSU
COMBO With new 40A POWER SUPPLY UNIT

•EOS 0720i NET3 DC INPUT 11V~28V
•7S 250W 20A! max Charge, 80W/10A max Discharge
•SYNC capable - Charge up to 2x7S for max 14S Flightpacks at 500W max.
• Comes with 40A USB Power Supply Unit
(See below for more info on Power Supply)

NET3 changes vs. previous 0720i NET:
- 12-Bit Balance Circuit Resolution for superb accuracy
- Built-In USB DataPort and supplied USB cable
- Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.)
- 20 Memory slots for batteries
- CYCLE mode for LiFePO4 and LiPo

CLICK DATASHEET TO READ MORE

DUE ARRIVAL
End MARCH
(with new reduced prices)

Supports A123

click to view

MADE IN KOREA

New! Hyperion EOS LBA10 Net with A123

The Most Powerful, Versatile Balance-Safety Adapter for Lithium Packs - Max 6S, 10A rating - Network 2 units for 7S~12S balancing. The Hyperion EOS Lithium Balance Adapter 10 (LBA10) is the newest, most feature-packed and reliable lithium balancer on the market today, and comes at a bargain price. Simply put, it is the most powerful, versatile, and safest way to charge your lithium packs today. A single LBA10 provides three ways to balance your lithium packs from 2S to 6S, at a maximum of up to 10-ampere rate!

Or, you can network two LBA 10 together with NET cable and adapter pack #HP-EOSLBA10-MSC. Set one LBA10 to Master and one to Slave mode. Series the LBA input leads together, and connect to a charger with appropriate S rating. Now you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done. Connect the packs in series and fly, with balanced packs from 7S to 12S in this way!

Or, say you have two 5S chargers, and want to charge two 5S packs to connect and fly as 10S. Use each LBA10 in Master mode, and connect each to a separate charger and battery. When charging is finished, Connect the two LBA10 together in Master-Slave configuration, and connect them to the just-charged lithium packs. The LBA10 will work together until every cell in the two packs are balanced together, then automatically shut down. Takes only a few minutes. Now series the packs together and fly in peace!

Each LBA 10 comes with balance harnesses for 2S and 3S packs

HYPERION BALANCER BOARDS & CHARGER ACCESSORIES...

HYPERION BALANCER BOARDS

SGD$8.50

SGD$8.00

SGD$9.00

SGD$11.00

HP-EOSLBA-TP
For Thunder Power / Flight Power
Packs (2-6S)
SGD$11.00
NOTE : For FP 4S pack, please remove wire #6 away on your FP lipo and insulate it.
See here : FlightPower Lipo wire #6

SGD$11.00

CHARGING CABLES AND SENSOR/PC/DATA Cables etc...

Click above for full diagram

HP-FG-CBL-CHG
HiRate Charge Cable for G3 LifePO4 RX and TX packs
Hyperion Hi-Rate Charge Cable for G3 LiFePO4 Radio Packs

Click above for full diagram

HP-FG-CBL-2EHR
G3 LiFe Pack Conn. 2 Pin TX JR9x to 3.5mm Gold Conn.
Hyperion Pack Connector for Transmitters, 2-pin EHR Connector, such as JR 9x series

Click above for full diagram

HP-FG-CBL-3STD
G3 LiFe Pack Conn. Standard RX/TX to 3.5mm Gold Conn.
Hyperion Pack Connector for all Receivers and any Transmitter, 3-pin standard servo plug

Click above for full diagram

HP-SW-OUT-TAM
Charge Harness for TAMIYA Plug
Charge Harness for TAMIYA Plug. May be used with Hyperion CLASSIC Car Packs, or any pack which has a standard Tamiya connector

For ORION/TRAXPOWER
2 Cell Race Packs
Click above for full diagram

HP-EOSOUT-CAR02
EOS Output Harness for Balance Charging 2S Car Packs such as ORION and TRAXPOWER

Fits EOS balance Chargers (EOS0403i, 0606i-x, 0610i-x) and LBA10. Battery-side has 4mm main bullet connectors, plus 2mm bullet for balance port on battery. Because long wires and extra connectors in the balance circuit can potentially reduce accuracy of charging and balancing, this harness in made to connect directly to the Balance Port on Hyperion balance chargers.

However, if you prefer (or need the extra length) you may use the Hyperion multi-adapter which came with your EOS charger and plug the EOSOUT-CAR02 balance connector into the 6S port on the Hyperion multi-adapter. If you have a charger which can charge 3.7v LiPo batteries, but does not have a balancer built in, you can use a Hyperion LBA10 Balancer between your charger and the EOSOUT-CAR02 harness, to balance charge your 2S Car pack.

HP-EOSLBA10-MSC
LBA10 NET Cable/Adapter Set
Set for Networking two LBA10 Balancers together, for balance charging two packs as one 7S to 12S pack. Includes Network Cable (for NET PORT) and one 4mm Female-Female adapter to serial-connect LBA10 Input leads together.

HP-EOS0610-MSC
Network Cable for EOS0610i
Cable for Networking two EOS0610i Chargers Together, for balance charging two packs as one 4S to 12S pack.

HP-EOS0606-PCCBL
Hyperion PC adapter cable for EOS 0606 chargers
Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections

To connect a Hyperion Balance Charger with Data Port to PC, you will need:
* This Harness, HP-EOS0606-PCCBL
* HP-TI-PRGUSB USB-to-Serial Adapter
* Cannot be used alone - must be combined with HP-TI-PRGUSB

HP-EOS06-PCCBL
Hyperion PC adapter cable for EOS xx NET/DUO chargers
Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS06xx NET/DUO Series Chargers, for PC Connections

To connect a Hyperion Balance Charger with Data Port to PC, you will need:
* This Harness, HP-EOS06-PCCBL
* HP-TI-PRGUSB USB-to-Serial Adapter
* Cannot be used alone - must be combined with HP-TI-PRGUSB

HP-EOS1210I-SEN
Temperature Sensor for EOS1210i, EOS 7i, or any Hyperion Charger which has a Temp Sensor Port.

HP-EOSLBA10-DPC
(LBA10 Data Port Cable)
DataPort Cable for connecting LBA10 Balancer to compatible Hyperion Chargers, in order to view individual cell voltages balancing during the charge process.
Compatible for Hyperion EOS 12S10i

OTHERS (Wall charger)

Wall charger for 2/3 cell
Li-Poly battery
Input: AC100V~240V, 50Hz~60Hz
Output: DC 8.4v/12.6V
Charging Current: 1.0A
Charge via JST Connector
Available for 2 cell (8.4V) or 3 cell (12.6V) separately
(Please ask for 2 or 3 cell charger)

POWER SUPPLY UNITS

Click above for full image

Switching Mode Power Supply 20A
Compact-size, lightweight, provided with a current limiter, an universal output for 4mm banana plugs and an automatic current regulator

•	Over-voltage, over-current, & overload protection
•	LED digital display voltage & current
•	Can be also function as a 12V Lead-Acid or 3 cells Lithium Pack charger
•	Input Voltage: 110~120V AC ~60Hz or 220~240V AC ~50Hz
•	Output voltage: 5V~15V DC (manual adjustable)
•	Output current: 0~20A (manual adjustable)
•	Dimension: 170×190×80mm

NEW ARRIVALS

Click above for full image

Switching Power Supply 40A
This USB power supply is fantastic device for charging :
• Mobile phones (iphone)
• Digital cameras
• Toy RC helicopters / RC cars / RC tanks / RC Helicopter Airplane Flight Simulators / RC Car Model Simulators
• Or any multimedia players (ipod)

Specifications :
• Input Voltage: 110~120V AC ~60Hz or 220~240V AC ~50Hz
• Output Voltage: 13.8V
• Main Output Current: 40A
• USB Output : 5V, 500mAh
• DC Output : 4.0mm Banana/Gold Connectors

Click above for full image

Power Supply 20V/6A
Input : 110-240V / 50-60Hz
Output : 20V 6A (120W max)