|
|
LIPO
BALANCERS
& ACCESSORIES
|
|
Universal
3-IN-1 Battery Balancer
This is a precision balancer, discharger and voltage
monitor. The unit can measure and balance Lipo packs
up to 6 cells and it also accepts receiver packs and
other battery packs with JST connector. The JST input
is limited to 11.1V input.
Size: 93.5 x 60 x 17mm,
B battery types: Li-polymer (2 ~ 6 cell),
R rx battery JST port up to 11.1V,
Balance setup: 2.0V ~ 3.9V per cell,
Discharge setup: 3.0V ~ 4.2V per cell,
Discharge Current: 200~450mA
|
|
| RELATED
PRODUCTS : LBA10 ACCESSORIES |
|
|
HP-EOSLBA10-DPC
(LBA10 Data Port Cable)
DataPort Cable for connecting LBA10 Balancer to
compatible Hyperion Chargers, in order to view
individual cell voltages balancing during the
charge process.
Compatible Chargers include:
Hyperion EOS 5i DP version
Hyperion EOS 5i AC/DC
Hyperion EOS 12S10i
|
|
|
|
HP-EOSLBA10-MSC NET CABLE
Set for Networking two LBA10 Balancers together,
for balance charging two packs as one 7S to 12S
pack. Includes Network Cable (for NET PORT) and
one 4mm Female-Female adapter to serial-connect
LBA10 Input leads together.
The LBA10 Balancer user's manual explains how
to use this cable and connector set, in order
to balance charge two packs of same make and capacity
as if they were a single pack, using two LBA10
networked togther in Master-Slave modes. After
such balance charging, you may safely connect
the two packs togther in Serial or Parallel as
you wish. (for example, two packs of Hyperion
LVX-5000-4S, connected in series after balance
charging to make an 8S 5000mAh pack)
|
|
|
|
HP-EOSLBA10-MC-H2S (2 Cell)
Standard Harnesses for LBA 10. 2S and 3S are included
with LBA10 purchase, and offered below as spares.
4S to 6S must be purchased as options below -
these fit Hyperion and other-brand packs. SEE
DETAILS - (these do NOT fit LBA6)
These attach to balance connector on Lithium packs
from HYPERION, E-TEC, POLYQUEST, POLY-Q, TWENTY
from Hobby Lobby, and some other brand lithium
packs on the market. |
|
|
|
HP-EOSLBA10-MC-H3S (3 Cell)
Standard Harnesses for LBA 10. 2S and 3S are included
with LBA10 purchase, and offered below as spares.
4S to 6S must be purchased as options below -
these fit Hyperion and other-brand packs. SEE
DETAILS - (these do NOT fit LBA6)
These attach to balance connector on Lithium packs
from HYPERION, E-TEC, POLYQUEST, POLY-Q, TWENTY
from Hobby Lobby, and some other brand lithium
packs on the market. |
|
|
|
HP-EOSLBA10-EH-H2S (2 Cell)
2S LBA 10 to balance NON-HYPERION-TYPE lithium
packs from other makers. Pack-side connector is
JST-EH type, mounted on quality PCB board
|
|
|
|
HP-EOSLBA10-EH-H3S (3 Cell)
3S LBA 10 to balance NON-HYPERION-TYPE lithium
packs from other makers. Pack-side connector is
JST-EH type, mounted on quality PCB board |
|
|
|
HP-EOSLBA10-EH-H4S (4 Cell)
4S LBA 10 to balance NON-HYPERION-TYPE lithium
packs from other makers. Pack-side connector is
JST-EH type, mounted on quality PCB board
|
|
|
|
HP-EOSLBA10-EH-H5S (5 Cell)
5S LBA 10 to balance NON-HYPERION-TYPE lithium
packs from other makers. Pack-side connector is
JST-EH type, mounted on quality PCB board |
|
|
|
HP-EOSLBA10-EH-H6S (6 Cell)
6S LBA 10 to balance NON-HYPERION-TYPE lithium
packs from other makers. Pack-side connector is
JST-EH type, mounted on quality PCB board |
|
|
|
|
