Please download Java(tm).




 
 
 
WORLD OF
HYPERION
 AIRCRAFT KITS | MOTORS | ESCs
AIRCRAFT KITS
CESSNA 182 TURBO
SKYLANE 10e

SGD$163.00
HYPERION SUPER
CHIPMUNK 10e

 SGD$163.00
HYPERION BEAR CAT, EPP RENO RACER

 SGD$86.00
HYPERION KATANA
HELIOS 10e
 SGD$163.00
HYPERION YAK-54 "40e - R1

PRICE DOWN!
SGD$310.00
SGD$250.00
HYPERION KATANA F3A 63e

PRICE DOWN!
SGD$334.00
SGD$305.00
HYPERION SNIPER 3D

 SGD$108.00
HYPERION YAK-54 "40e"
(R2 - Russian Scheme)

PRICE DOWN!
SGD$310.00
SGD$250.00
HYPERION P-51 MUSTANG,
EPP RENO RACER

 SGD$86.00
HYPERION & WAYPOINT MOTORS / ACCESSORIES
Hyperion Z-2209/26

SGD$73.00
Hyperion Z-2213/16
SGD$78.00
Hyperion Z-2213/20

SGD$78.00
Hyperion Z-2213/24

SGD$78.00
Hyperion Z4020-14

SGD$166.00
Hyperion Z4020-14(Backplate)

SGD$172.00







WAYPOINT E-2208-30

SGD$46.00
WAYPOINT E-2208-34

SGD$46.00
WAYPOINT E-2212-22

SGD$50.00



WAYPOINT E-2212-26

SGD$50.00
WAYPOINT E-2215-18

SGD$55.00
WAYPOINT E-2215-22

SGD$55.00
MOTOR ACCESORIES
HP-Z40-FRTMNT
Front Aluminum Mount Cage for Z4020 - Adjustable.
SGD$33.00
(in stock)
HP-Z40-BKPLT-SIM
BACKPLT and screws , for Z40 Std and BkMnt Motors
Includes: Aluminum BackMount Plate & Screws
SGD$14.00
(in stock)

 
HP-Z22-BKMNT
Hyperion Z22 Series Backmount w/adapter
SGD$6.30
(in stock)

 
W-E2208-RS
Motor Shaft Sets for Waypoint E2208 Series motors Sets include two motor shafts, two 3.0mm collets, and 2 setscrews
SGD$7.80/set
(in stock)

 

 

W-E2212-RS
Motor Shaft Sets for Waypoint E2212 Series motors Sets include two motor shafts, two 3.0mm collets, and 2 setscrews
SGD$8.20/set
(in stock)

 
W-E2215-RS
Motor Shaft Sets for Waypoint E2215 Series motors Sets include two motor shafts, two 3.0mm collets, and 2 setscrews
SGD$8.20/set
(in stock)
HP-Z2213-SFT
Z2213 Series Replacement MOTOR SHAFT with C-Clip and Washer
SGD$6.50
(in stock)
HP-Z22-MNTSTIK-AL2
ALUMINUM Stick Mount for Z22, AXI 22, Warp 4, Mega 16 and similar outrunners - up to 200W
Only 6.8 grams!
SGD$6.30
(in stock)
HP-ADAP-23S
Hyperion SHORT Collet ADAPTER M5 (SF) for 2.3mm shaft
SGD$5.60
(in stock)
HP-ADAP-30L
Hyperion LONG Collet ADAPTER M5 (EP) for 3.0mm shaft
SGD$6.00
(in stock)
HP-ADAP-30S
Hyperion SHORT Collet ADAPTER M5 (EP) for 3.0mm shaft
SGD$5.60
(in stock)
HP-ADAP-32L
Hyperion LONG Collet ADAPTER M5 (EP) for 3.2mm shaft
SGD$6.00
(in stock)
HP-ADAP-32S
Hyperion SHORT Collet ADAPTER M5 (EP) for 3.2mm shaft
SGD$5.60
(in stock)

 

 

 
HP-ADAP-8-60XL
This is a large, strong adapter for props in the 10" to 22" range, with 8mm center hole. Made to fit 6mm motor shaft and gearbox shafts, with suffcient length to mount large APC E and SPORT props, and also a spinner if desired. 3mm hole in end of adapter allows mounting of various spinners.
SGD$12.50
(in stock)

 

HP-ADAPNUT-M5
Bullet Safety Nut to fit prop adapters with M5 Shaft
SGD$4.80
(in stock)

 

 
Hyperion Collet Adapter Puller for M5 and M6 Adapters
For easy removal of jammed prop adapter from the the motor shaft
SGD$19.00
(in stock)

 
HP-Z30XX-BKMNT
Backmount for Z30XX with prop shaft and screws
SGD$13.00
(in stock)
HP-Z3019-SFT
Spare Shaft for Z3019-XX
with C-Clips
SGD$8.00
(in stock)
HP-Z3025-SFT
Spare Shaft for Z3025-XX
with C-Clips
SGD$8.50
(in stock)
HYPERION CHARGERS / BALANCER / ACCESSORIES
NEW! Hyperion EOS 5i DP AC-DC Dual with A123-Input CHARGER, with DataPort
for LBA10
SGD$185.00
(in stock)
NEW! Hyperion EOS 0606i 6S 6A max CHARGER AC/DC with integrated LBA10 Balancer!
SGD$205.00
ETA: 1 Nov 2007
NEW! Hyperion EOS 0610i 6S 16N CHARGER, with Integrated LBA 10A balancer, TCS and 250W charger power. Network to 500W and 12S max(2x6S balanced)
SGD$248.00
ETA: 1 Nov 2007
   
NEW! Hyperion EOS 1210i-A (A123)12S 30N CHARGER with Terminal Capacity Selection and Speed "2C" Rate
SGD$235.00
(in stock)
   
 
New! Hyperion EOS LBA10 Net with A123
SGD$62.00
(in stock)
BAGWING-40
for 25-40 size EP Planes
SGD$35.00
(in stock)
EOS-LBA10 MULTI-ADAPTER BALANCER HARNESSES
(Hyperion / Polyquest / Thunder Power / Flight Power etc...)
HP-EOSLBA-HP
For Hyperion / Polyquest (2-6S)
SGD$11.00
HP-EOSLBA-TP
For Thunder Power / Flight Power
Packs (2-6S)
NOTE:For FP 4S pack, please remove wire #6 away on your FP lipo and insulate it.
See here : FlightPower Lipo wire #6
SGD$11.00
HP-EOSLBA-XH
For generic JST XH Type (2-6S)
*Fits most Asia Origin packs*
SGD$11.00
HP-EOSLBA-EH
For generic JST EH Type (2-6S)
SGD$11.00
EOS-LBA10 BALANCER HARNESSES
HP-EOSLBA10-XH-H*S (for standard lipos)
HP-EOSLBA10-XH-H2S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers.
(these do NOT fit LBA6)
SGD$5.80 		HP-EOSLBA10-XH-H3S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers.
(these do NOT fit LBA6)
SGD$6.20		 HP-EOSLBA10-XH-H4S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers.
(these do NOT fit LBA6)
SGD$6.60
HP-EOSLBA10-XH-H5S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers.
(these do NOT fit LBA6)
SGD$6.90		 HP-EOSLBA10-XH-H6S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers.
(these do NOT fit LBA6)
SGD$7.20		  
 
EOS-LBA10 BALANCER HARNESSES
HP-EOSLBA10-EH-H*S (for non Hyperion lipos)
HP-EOSLBA10-EH-H4S
4S LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board
SGD$6.50
 HP-EOSLBA10-EH-H5S
5S LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board
SGD$7.00
 HP-EOSLBA10-EH-H6S
6S LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board
SGD$7.50
EOS-LBA10 BALANCER HARNESSES
HP-EOSLBA10-MC-H*S (for Hyperion lipos)
HP-EOSLBA10-MC-H2S
Standard Harnesses for LBA 10. 2S and 3S are included with LBA10 purchase, and offered below as spares. 4S to 6S must be purchased as options below - these fit Hyperion and other-brand packs. SEE DETAILS - (these do NOT fit LBA6) These attach to balance connector on Lithium packs from HYPERION, E-TEC, POLYQUEST, POLY-Q, TWENTY from Hobby Lobby, and some other brand lithium packs on the market.
SGD$4.80
HP-EOSLBA10-MC-H3S
Standard Harnesses for LBA 10.
2S and 3S are included with
LBA10 purchase, and offered
below as spares. 4S to 6S must
be purchased as options below - these fit Hyperion and other-
brand packs. SEE DETAILS -
(these do NOT fit LBA6) These attach to balance connector on Lithium packs from HYPERION, E-TEC, POLYQUEST, POLY-Q, TWENTY from Hobby Lobby, and some other brand lithium packs
on the market.
SGD$5.50
HP-EOSLBA10-MC-H4S
Standard Harnesses for LBA 10.
2S and 3S are included with
LBA10 purchase, and offered
below as spares. 4S to 6S must
be purchased as options below - these fit Hyperion and other-
brand packs. SEE DETAILS -
(these do NOT fit LBA6) These attach to balance connector on Lithium packs from HYPERION, E-TEC, POLYQUEST, POLY-Q, TWENTY from Hobby Lobby, and some other brand lithium packs
on the market.
SGD$6.00