|
ITEM
|
Decription
|
Price
|
CLICK FOR FULL IMAGE
|
GY48V
Heading-Lock GYRO
Specifications:
1)Dimensions(mm): 28x28x20
2)Digital proportional R/C system
3)Operating voltage: 4.8V ~ 6V
4)Operating temperature:-10°c~ +45°c
5)Operating current: 80mA
Functions:
1)Minimizes changes in an aircraft's attitude by wind
etc.
2)Angular acceleration commands used.
3)Sensor vibration proofing.
4)Simple sensitivity adjustment.
|
|
|
CLICK FOR FULL IMAGE
|
SJGD
PG-800 mems AVCS Gyro + LCD
PROGRAMMER COMBO
PG800 Specs :
• Working voltage: 4~10V, current<60mA
• Overall dimension: 29.5mm×28mm×12.7mm
• Weight: 17.5g
•Working condition: -10~60°C
• Control actuator compatibility: 1520uSec and
760uSec digital servos at 333Hz and 250Hz.
READ MORE DETAILS HERE:
|
|
|
CLICK
FOR FULL IMAGE
|
SJGD
PG-800 LCD Programmer Only
Comes with the following :
• LCD Programmer Unit for Digital Servos
• Programming Cables
• Plastic Hard Case
Features:
• Servo Type Selection (SERVOTYP)
• Gyro direction selection (GYDIRECT)
• Rudder Servo Neutral Adjustments (MID-TRIM)
• Rudder Right/Left Pitch Travel Limit (R/L-LIMIT)
• Right/Left Pyro Stop Gain (R/LPIRGAIN)
• Rudder Stick Gain (RUD-GAIN)
• Acceleration / Decceleration Curve (ACC-EXP)
• DeadBand Zone Adjustments (5~100)
• Normal / AVCS Rubber Curve Settings
READ MORE DETAILS HERE:
|
|
|
CLICK FOR FULL IMAGE
|
SJGD
PG-800 mems AVCS Gyro + LCD
PROGRAMMER + MKS BLS980 BRUSHLESS Digital Servo COMBO
PG800 Specs :
• Working voltage: 4~10V, current<60mA
• Overall dimension: 29.5mm×28mm×12.7mm
• Weight: 17.5g
•Working condition: -10~60°C
• Control actuator compatibility: 1520uSec and
760uSec digital servos at 333Hz and 250Hz.
READ MORE DETAILS HERE:
MKS BLS980 Brushless
Tail Servo!
(760us)
Operating Voltage:
4.8V/6.0V
Operating Temperature Range: -10 to +60°C
Operating Speed : 0.04sec (4.8V)/0.03sec (6V)
Stall Torque : 2.5kg (4.8V)/3.1kg (6V)
Gear Train : Titanium!
Motor Type : Brushless
Case: Aluminum-magnesium alloy shell!
Weight: 2.12 oz. (60g)
Wire Length: 15cm
Dimensions: 40 × 20 × 40 mm mm
Suitable Gyros: Spartan DS760, Futaba GY611, Align GP,
PG-800, V-Bar Tail, SL720...(760µs mode)
|
|
|
CLICK FOR FULL IMAGE
|
SJGD
PG-800 mems AVCS Gyro + LCD
PROGRAMMER + MKS DS-8910 Digital Servo COMBO
PG800 Specs :
• Working voltage: 4~10V, current<60mA
• Overall dimension: 29.5mm×28mm×12.7mm
• Weight: 17.5g
•Working condition: -10~60°C
• Control actuator compatibility: 1520uSec and
760uSec digital servos at 333Hz and 250Hz.
READ MORE DETAILS HERE:
MKS DS-8910 Digital Tail Servo:
Operating Voltage: 4.8V
Operating Temp Range: -10 to +60 Degree C
Operating Speed (4.8V): 0.054sec/60°
Stall Torque (4.8V): 27.91 oz/in. (2.01kg.cm)
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive Bearing
Type: Dual Ball Bearings
Gear Type: 2 Metal Gears + 3 alloy Gears
Connector Wire Length: 15cm
Weight: 0.97 oz. (27.4g)
Wire Length: 15cm
Dimensions: 35.5 x 15 x 28.6mm
Suitable Gyros:Spartan DS760, Futaba GY611, Align GP,
PG-800, V-Bar Tail, SL720...(760µs mode)
|
|
|
|
|
SJGD
PG-800 mems AVCS Gyro + LCD
PROGRAMMER + HYPERION DS12GCP Tail Servo
COMBO
PG800 Specs :
• Working voltage: 4~10V, current<60mA
• Overall dimension: 29.5mm×28mm×12.7mm
• Weight: 17.5g
•Working condition: -10~60°C
• Control actuator compatibility: 1520uSec and
760uSec digital servos at 333Hz and 250Hz.
READ MORE DETAILS HERE:
HP-DS12GCP
(Digital Tail Servo)
ATLAS
DIGITAL PROGRAMMABLE SERVO
Weight : 17.3g
Speed 4.8V/6.0V : 0.08 / 0.06 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 1.3kg / 1.8kg
Holding Torque 4.8V/6.0V : 2.6kg / 3.2kg
Dimensions : 29.5 x 12 x 26mm
Gear Train Primary Material : CARBON POLY
Bearing : Plain
Recommended applications : super-fast tail servo for
450-500 size EP helicopters.
NOTE : For DS12GCP, we recommend 1520us/ 250Hz
setting on the PG800 for best performance. Recommended
for 450 size heli.
|
|
|
|
|
SJGD
PG-800 mems AVCS Gyro + LCD
PROGRAMMER + HYPERION DS20GMD Tail Servo COMBO
PG800 Specs :
• Working voltage: 4~10V, current<60mA
• Overall dimension: 29.5mm×28mm×12.7mm
• Weight: 17.5g
•Working condition: -10~60°C
• Control actuator compatibility: 1520uSec and
760uSec digital servos at 333Hz and 250Hz.
READ MORE DETAILS HERE:
HP-DS20GMD
(Digital Tail Servo)
ATLAS
DIGITAL PROGRAMMABLE SERVO
Weight : 49g
Speed 4.8V/6.0V : 0.07 / 0.05 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 1.6kg / 2.0kg
Holding Torque 4.8V/6.0V : 3.2kg / 4.0kg
Dimensions : 40.0 x 19.5 x 37.80mm
Gear Train Primary Material : METAL GEAR
Bearing : Double Ball
Recommended for high performance 30-90 sized helicopters.
NOTE : For DS12GCP, we recommend 1520us/ 250Hz
setting on the PG800 for best performance. Recommended
for 450 size heli.
|
|
|
| KDS-800
AVCS GYRO |
NEW
METAL CASING! |
KDS-800
AVCS
Heading Hold Gyro
NEW METAL HARD CASING
TO MINIMISE BOOMSTRIKE DAMAGES
Specifications:
KDS800 is a very high quality AVCS Heading Hold Gyro
with awesome performances - you can compare or exceed
the performance of those popular brands the market,
at only a fraction of the cost!
KDS800 is a dual rate&head lock gyro,which designed
for helicopter model with high quality and standard.
With good functions, it makes the sensor work fully.
Complete aluminum shell can protect the gyro to avoid
being broken. Precise and reliable head lock function
helps helicopter fly more stably and safely.
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating temperature: -10 to +45 deg celcius
Operating current:80mA
1) DELAY Adjustments - Dial
2) LIMIT Adjustments - Dial
3) DS Mode (for digital Servos) - Switch
4) DIRECTION Mode (Nor / REV) - Switch
|
|
|
HP-DS20-GMD COMBO
(Metal Gears)
|
KDS800
+ HP-DS20GMD COMBO
KDS-800 AVCS
Heading Hold Gyro
Specifications:
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating temperature: -10 to +45 deg celcius
Operating current:80mA
HP-DS20GMD
ATLAS
DIGITAL PROGRAMMABLE SERVO
(HIGH
SPEED TAIL SERVO)
Weight : 49g
Speed 4.8V/6.0V : 0.07 / 0.05 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 1.6kg / 2.0kg
Holding Torque 4.8V/6.0V : 3.2kg / 4.0kg
Dimensions : 40.0 x 19.5 x 37.80mm
Gear Train Primary Material : METAL GEAR
Bearing : Double Ball
Recommended for high performance 30-90 sized helicopters
and large aerobatic planes.
|
|
|
HP-DS12-GCP COMBO
|
KDS800
+ HP-DS12GCP COMBO
KDS-800 AVCS
Heading Hold Gyro
Specifications:
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating temperature: -10 to +45 deg celcius
Operating current:80mA
HP-DS12GCP
(Digital High Speed Servo)
ATLAS
DIGITAL PROGRAMMABLE SERVO
Weight : 17.3g
Speed 4.8V/6.0V : 0.08 / 0.06 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 1.3kg / 1.8kg
Holding Torque 4.8V/6.0V : 2.6kg / 3.2kg
Dimensions : 29.5 x 12 x 26mm
Gear Train Primary Material : CARBON POLY
Bearing : Plain
Recommended applications : super-fast tail servo for
450-500 size EP helicopters. |
|
|
HP-DS09-GMB
COMBO
(Metal Gears) |
KDS800
+ HP-DS09GMB COMBO
KDS-800 AVCS
Heading Hold Gyro
Specifications:
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating temperature: -10 to +45 deg celcius
Operating current:80mA
HP-DS09-GMD
ATLAS
DIGITAL PROGRAMMABLE SERVO
Weight : 8.4g
Speed 4.8V/6.0V : 0.06 / 0.05 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 0.8kg / 1.0kg
Holding Torque 4.8V/6.0V : 1.6kg / 2.0kg
Dimensions : 23.0 x 9.0 x 22.8mm
Gear Train Primary Material : METAL GEARS
Bearing : Top & Bottom ball bearings (Dual)
Recommended applications : super-fast servo for smaller
helicopters, to cure those tail-wagging blues forever.
|
|
|
HP-DS11-GCB
COMBO |
KDS800
+ HP-DS11GCB COMBO
KDS-800 AVCS
Heading Hold Gyro
Specifications:
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating temperature: -10 to +45 deg celcius
Operating current:80mA
DS11GCB Digital Servo Specifications
Weight : 10.3g
Speed 4.8V/6.0V : 0.06 / 0.05 sec - 60 deg
Dynamic Torque 4.8V/6.0V : 0.8kg / 1.0kg
Holding Torque 4.8V/6.0V : 1.6kg / 2.0kg
Dimensions : 23.5 x 11.5 x 21.0mm
Gear Train Primary Material : CARBON POLY
Bearing : Top ball
Recommended applications : super-fast servo for smaller
helicopters, to cure those tail-wagging blues forever.
|
|
|
|
|
KDS-800
AVCS
Heading Hold Gyro
Spare Casing Replacement
(Metal)
comes with:
1) Top and Bottem Cover
2) Case
3) Adhesive Foam Tape (Double sided)
|
|
|
