REVOX
Brushless ESCs (NEW 2010) REVOX
Brushless ESCs is a new generation of brushless and sensorless
speed controllers with the control of micro processor. Its
performance in terms of compatibility, reliability and stability
can compete with world famous brands. Features:
•2 Series (STELLAR Series are Linear BEC) / (NOVA
Series are Switching BEC)
•Extremely low internal resistance
•Automatically
detects the number of cells within the battery pack.
•Super
smooth and accurate throttle linearity
•Safety
thermal over-load protection
•Auto
throttle shut down in signal lose situation
•Supports
high RPM motors
•Power
arming protection (prevents the motor from accidentally running
when switched ON)
•New
Advanced programming software
REVOX ESC allows you to program all functions to fit your
specific needs,which makes it very efficient and user friendly:
1.User programmable brake setting (we recommend using brake
for only folding props applications)
2.User programmable battery type(LiPo or NiCd/NiMh)
3.User programmable low voltage cutoff setting
4.User programmable factory default setup restore
5.User programmable timing settings (to enhance ESC efficiency
and smoothness)
6.User programmable soft acceleration start ups (for delicate
gearbox and helicopter applications)
7.User programmable governor mode(for helicopter applications)
8.User programmable motor rotation(clockwise\counterclockwise)
9.User programmable switching frequency
10.User programmable low voltage cutoff type (power reduction
or immediate shutdown)
REVOX
BRUSHLESS ESC
REVOX-STELLAR
30A LBEC
(Linear BEC) Specifications:
Continuous Current: 30A
Burst Current: 40A (no less than 10 seconds)
Input: 2-3 cells Li-Po or 5-10 NiMh/NiCd
BEC Output (Linear): 5V/2A
Dimension(mm): 23x43x6
Weight: 25g
Application : Plane/Heli (with governor)
Motor Reversible : YES
*ESC is defaulted for plane, for helicopter please
activate governor mode / soft start via programming
REVOX-NOVA
40A SBEC
(Switching BEC) Specifications:
Continuous Current: 40A
Burst Current: 60A (no less than 10 seconds)
Input: 2-6 cells Li-Po or 5-18 NiMh/NiCd
BEC Output (Switching): 5.5V/4A
Dimension(mm): 23x52x6
Weight: 30g
Application : Plane/Heli (with governor)
Motor Reversible : YES
*ESC is defaulted for plane, for helicopter please
activate governor mode / soft start via programming
REVOX-NOVA
60A SBEC
(Switching BEC) Specifications:
Continuous Current: 60A
Burst Current: 80A (no less than 10 seconds)
Input: 2-6 cells Li-Po or 5-18 NiMh/NiCd
BEC Output (Switching): 5.5V/4A
Dimension(mm): 23x52x10
Weight: 40g
Application : Plane/Heli (with governor)
Motor Reversible : YES
*ESC is defaulted for plane, for helicopter please
activate governor mode / soft start via programming
REVOX-NOVA
85A SBEC
(Switching BEC) Specifications:
Continuous Current: 85A
Burst Current: 100A (no less than 10 seconds)
Input: 2-6 cells Li-Po or 5-18 NiMh/NiCd
BEC Output (Switching): 5.5V/4A
Dimension(mm): 34x52x14
Weight: 47g
Application : Plane/Heli (with governor)
Motor Reversible : YES
*ESC is defaulted for plane, for helicopter please
activate governor mode / soft start via programming
REVOX
PROGRAMMING CARD: The REVOX ESCs can be programmed via Throttle Stick
programming sequence via your radio transmitter. However,
this programming card allows you to program your ESC
with a few simple steps:
1) Select jumper pins to assign your values
2) For OPTO esc (which we will release later), insertan external 4.8V Nimh/Nicd battery
3) For BEC esc, plug your lipo directly into your ESC
for immediate programming.
All
rights reserved, Sky Hobbies Singapore 2010.
www.skyhobbies.com.sg
Email : sales@skyhobbies.com.sg
