| TECHONE
ESC |
|
|
TECHONE
10A ESC
(Brushless)
Weight:
8gram
Operating voltage: 2S lipo recommended
Operating current: 10A
BEC cont.amp: 1.0A
No Connectors (Bare ends on both sides)
Recommended for Foam F3P Models
|
|
|
|
|
TECHONE
18A ESC (Brushless)
Weight:
15gram
Operating voltage: 2-3S lipo
Operating current: 18A
BEC cont.amp: 2.0A
No Connectors (Bare ends on both sides)
|
|
|
|
OTHERS / MISCELLANEOUS |
|
|
ESC-15A Brush ESC (BEC)
For 380-400 size brush motor
With ON/OFF Switch Harness |
|
|
|
|
3A
EXTERNAL BEC WITH LED (7.4V)
Input voltage: Require 7.4V 2cell Lithium battery
Output voltage: DC6V Max.
Continuous Current: 3A
- Integrated power ON/OFF switch
- LED Voltage indicator meter
- 5.3V Step-Down Voltage in Receiver
- Power up to 4 Servos simultaneously.
- Recommended application:with OPTO ESCs
- Regulator Utilizes a linear design, resulting in no
interference to the receiver
Size: 60×25×6mm
Weight: 16g(including wire set)
Recommended for GAUI HURRICANE 550 |
|
|
|
|
PULSO
3A U-BEC
Output voltage:5.0V/6.0V
Weight:9g
Current capability:3A
Wire length:16cm
Regulator Technology:Switching via jumper
Input connector:JST RCY
Assembly Technology:Surface mount
Output connector:J-type 3-pin
Dimension:20 x 30 x 7mm(excluding wire)
Recommended application:with OPTO ESCs
|
|
|
|
|
DYNAM
RX REGULATOR (Switching)
Input: Use only2-cell (7.4V lipo)
Input connector : JST Female included
Output: 5.0V/6.0V
Current capability: 3A
Dimension: 20X30X7mm
Weight: 9g
Applications : EP Plane, Heli, 1/8GP and 1/10GP
|
|
|
