E-FLITE BLADE 400 3D


Blade 400 3D RTF Electric Mini Helicopter
Product Specifications

Type: RTF Electric 3D Mini Heli
Main Rotor Diameter: 28.2 in (718mm)
Tail Rotor Diameter: 5.3 in (135mm)
Gross Weight: RTF with LiPo battery, 23.5 oz (665 g)
Length: 25.6 in (650mm)
Motor Size: 420H brushless outrunner, 3800Kv
Kit/ARF/RTF: RTF
Control System: Spektrum™ DX6i 2.4GHz DSM2™ computer programmabe transmitter (included), Spektrum AR6100e Microlite receiver (installed), DS75 digital Sub-Micro servos (4 installed), 120-degree CCPM Rotor Blade Length: 12.8 in (325mm)




The Blade© 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum™ 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i's advanced DSM2™ protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.

Watch video below for the imppecable 3D Flight Performances:

The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.

Other DX6i features include:
• Full-range capability
• 10-model memory
• Heli and airplane programming
• Two types of swashplate mixing: standard or 120º CCPM
• 3-axis dual rates and exponential
• Travel adjust
• Servo monitor
• Two 5-point throttle curves
• Three 5-point pitch curves
• Revo mixing
• Gyro sensitivy programming
• Two programmable mixes

The DX6i is not only perfectly suited for the Blade 400––it can also be used to fly just about any size and type of model due to its full-range and programming capabilities. E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.


KEY FEATURES:
1. Aluminum and composite swashplate
2. 420H 3800Kv brushless motor
3. Composite main frame
4. 3S 11.1V 1800mAh 20C LiPo battery
5. 25-amp helicopter brushless ESC
6. Auto-rotation system
7. Spektrum AR6100e 2.4GHz Microlite receiver
8. G110 micro heading lock gyro
9. DS75 digital Sub-Micro servos
10. CCPM (Cyclic Collective Pitch Mixing) control
11. Thrust bearings and full ball bearings throughout
12. 325mm symmetrical wooden main rotor blades


The Blade 400 3D will give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes out of the box 100% factory built and equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. It’s also big enough that you can fly outdoors in breezier conditions that would ground smaller micro helis. And because it’s flight tested at the factory, no pre-flight setup is required. The Blade 400 3D is ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery.

ORDER YOUR BLADE400 3D HERE : ORDER