|
ITEM
|
Description
|
Price
|
|
|
The
Motor Bearing Lubrication Kit will help you maintain
the bearings in your brushless electric motor. Today's
brushless motors, especially the helicopter motors,
can be pretty hard on the bearings. In an average flight,
the motor in a 450 size helicopter spins around almost
a quarter million times! Without proper lubrication,
the balls in the bearings can wear out quickly, leading
to premature failure. At these speeds, the oil can get
thrown out of the bearings in as little as 10-15 flights.
Once the bearings loose their lubrication, they can
heat up and wear out very quickly. A small drop placed
on each bearing about once every 10-15 flights is enough
to maintain proper lubrication to insure the longest
possible life for your motor bearings. The oil included
in this kit contains everything necessary to keep your
motor operating as long as possible. Content : 30mL |
|
|
|
|
HYPERION HS-3026-1000KV
Magnet Count : 8
Stator Poles : 12
Weight : 199g
Shaft Diameter : 5mm
Max Cont. Current : 62A
Max Cont. Watts : 1300W
Max Peak Current : 83A
Max Cont. Watts : 1755W
Rpm/V : 1000KV
Recommendations :
Hirobo Lepton Helicopter upgrade motor & lower amp
applications.
The new Hyperion Hs motor series cost
more than the "budget" brands, but provide much more
value in the short run - and over the years. Hyperion
Hs motors are made in cooperation with partner Scorpion,
and include only high-rpm Japanese bearings of top quality
and lifespan.
 |
|
|
|
|
HYPERION HS-3026-1210KV
Magnet Count : 8
Stator Poles : 12
Weight : 193g
Shaft Diameter : 5mm
Max Cont. Current : 65A
Max Cont. Watts : 1365W
Max Peak Current : 87A
Max Cont. Watts : 1840W
Rpm/V : 1210KV
Recommendations :
Duration choice for Trex 500 on 6S, or high-power using
8S lipo with 12T~13T pinion. ESC 60A~90A. Also popular
for some medium-fast prop airplanes.
The new Hyperion Hs motor series cost
more than the "budget" brands, but provide much more
value in the short run - and over the years. Hyperion
Hs motors are made in cooperation with partner Scorpion,
and include only high-rpm Japanese bearings of top quality
and lifespan.
|
|
|
|
|
HYPERION HS-3026-1400KV
Magnet Count : 10
Stator Poles : 12
Weight : 199g
Shaft Diameter : 5mm
Max Cont. Current : 80A
Max Cont. Watts : 1680W
Max Peak Current : 108A
Max Cont. Watts : 2265W
Rpm/V : 1400KV
Recommendations :
Max 3D Upgrade on 6S G3 2600VX lipo, for Trex 450 (14,
15T) and Mikado Logo 400 (14T, 15T). Head, grips, and
blades should be metal/carbon respectively. ESC 80A~90A.
Superb for fast prop airplanes and EDF.
The new Hyperion Hs motor series cost
more than the "budget" brands, but provide much more
value in the short run - and over the years. Hyperion
Hs motors are made in cooperation with partner Scorpion,
and include only high-rpm Japanese bearings of top quality
and lifespan.
|
|
|
|
|
HYPERION HS-3026-1600KV
Magnet Count : 6
Stator Poles : 9
Weight : 196g
Shaft Diameter : 5mm
Max Cont. Current : 70A
Max Cont. Watts : 1470W
Max Peak Current : 94A
Max Cont. Watts : 1980W
Rpm/V : 1600KV
Recommendations :
Upgrade motor for Trex 500 6S on 13T. Improved performance,
but stock Align ESC can be used. Also a
good upgrade for Mikado Logo 400 on 6S with 15T or 16T
pinion. Also often used in EDF/Pylon airplanes.
The new Hyperion Hs motor series cost
more than the "budget" brands, but provide much more
value in the short run - and over the years. Hyperion
Hs motors are made in cooperation with partner Scorpion,
and include only high-rpm Japanese bearings of top quality
and lifespan.
|
|
|
|
|
HYPERION HS2221-1630 Outrunner
Weight : 79g
Stator Poles: 9 / Magnet Count : 6
Resistance: 0.079 Ohm
KV: 1630 rpm/V
Shaft Diameter: 3.17mm
Max Cont. Current: 25A
Max Cont. Watts: 400W
Max Peak Current: 38A
Max Peak Watts: 600W
ESC Recommended : 35-60A
Recommendations :
For OUTRAGE G5 (or Trex 450, TT Mini Titan), For G3
2200VX 6S lipo pack, 13T pinion usually, but 12T to
14T may be usable, Check headspeed and current to avoid
over-stress., ESC is typically 35A~60A SBEC type
|
|
|
|
|
HYPERION HS2221-3595 Outrunner
Weight : 79g
Stator Poles: 9 / Magnet Count : 6
Resistance: 0.024 Ohm
KV: 3595 rpm/V
Shaft Diameter: 3.17mm
Max Cont. Current: 45A
Max Cont. Watts: 475W
Max Peak Current: 60A
Max Peak Watts: 640W
ESC Recommended : 40-60A
Recommendations :
Most popular type for 450-480 Heli with 150T main. 11T
to 13T pinion on 3S for 2800~3300rpm headspeed. 40A~60A
ESC, 2100Mah+ 25C~35C battery, metal head suggested.
|
|
|
|
|
NEW
ARRIVALS!
HYPERION HS2221-4400 Outrunner
Weight : 79g
Stator Poles: 9 / Magnet Count : 6
Resistance: 0.024 Ohm
KV: 3595 rpm/V
Shaft Diameter: 3.17mm
Max Cont. Current: 52A
Max Cont. Watts: 525W
Max Peak Current: 70A (Peak)
Max Peak Watts: 705W (Peak)
ESC Recommended :60A & above
Recommendations :
Max 3D 450-480 Heli with 150T main. 10T to 13T pinion
on 3S for 3200~3800rpm headspeed. 12T and 13T pinion
MUST use metal head&grips, carbon blades, 60A ESC and
2200Mah 35C battery pack!
|
|
|
|
|
HYPERION ZS2213/22 Outrunner
Weight : 59.7g
Winding: 18T
Resistance: 0.082 Ohm
KV: 862 rpm/V
Shaft Diameter: 3.0mm
Typical Current: 10A-17A
Max Current: 21A
Max Power: 240 Watts
ESC Recommended : 25A
Comes with full hardware accessories and 3.0mm
CNC Prop Adaptor in new packaging
|
|
|
|
|
HYPERION ZS2213/18 Outrunner
Weight : 59.7g
Winding: 18T
Resistance: 0.082 Ohm
KV: 1042 rpm/V
Shaft Diameter: 3.0mm
Typical Current: 12A-20A
Max Current: 25A
Max Power: 280 Watts
ESC Recommended : 25A
Comes with full hardware accessories and 3.0mm
CNC Prop Adaptor in new packaging
|
|
|
|
|
HP-P1919-04M-23
For Ducted Fan, Helicopter,
or Geared Applications using 2.3mm motor shaft
Stator Diameter: 19mm
Magnet Length : 19mm
Weight: 56.7g
RPM : 3960KV
Winding : 4T
Outside Diameter: 23.65mm
Length: 33.3mm (Excluding Shaft)
Output Shaft Diameter:2.3 mm
Mount Screw Diameter (mm): 2 x M2.5
Mount Spacing : 16mm apart
|
|
|
|
|
HP-P1919-06M-23
For Ducted Fan, Helicopter,
or Geared Applications using 2.3mm motor shaft
Stator Diameter: 19mm
Magnet Length : 19mm
Weight: 56.7g
RPM : 2860KV
Winding : 6T
Outside Diameter: 23.65mm
Length: 33.3mm (Excluding Shaft)
Output Shaft Diameter:2.3 mm
Mount Screw Diameter (mm): 2 x M2.5
Mount Spacing : 16mm apart
|
|
|
|
|
HYPERION
HP-Z1709-9T
Outer Diameter : 20.9mm
Length : 22.7mm
Shaft Diameter : NA-Screw Mount 2 x M2
Mount Screw Diameter : 2 x M2
Maximum Efficiency : 6.7
Peak Current : 9.5A/60sec
Lipo Cells : 2~3
Winding : 9T
Resistance : 0.195
RPM/V : 1500KV
Weight : 24g
Suitable for RC Kites / Indoor Foamies
|
|
|
|
|
HYPERION
HP-H3025-10+CF (Heli)
WITH COOLING FAN
Outer Diameter : 37mm
Length : 50mm
Weight : 186g
Shaft Diameter : 5mm
Mount Screw Diameter : 3mm
Maximum Efficiency : 32-42A
Peak Current : 52A/60sec
Lipo Cells : 2~4
NiMh & NiCd Cells : 6~12
Winding : 8T
Resistance : 0.0175
RPM/V : 815KV
Recommended ESC : HP-TITAN-50P / 80P
Recommended Helis : Hirobo Lepton / HDX 500 / 3DX
500
|
|
|
HYPERION
MOTORS
