SKY HOBBIES SINGAPORE

ITEM	Decription	Price
FLASH GLUE - Made In USA
	Flash Glue CA5 - Thin (2 OZ) Product Code : 99903 Flash Glue CA5 Thin has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of few seconds. Surfaces to be bonded must be tight fitting and should be held together while applying the CA around the edges of the seam. Applications: High performance wicking and bonding of close-fitting parts including: balsa wood, plastics, rubbers, metal, leather, fabric and composites. Substrates can be bonded to themselves or in various combinations. Useful hints/notes: Bond time is extremely fast, align parts prior to assembly. Content : 2 OZ	SGD$13.00

	Flash Glue Gap CA+ 200 Medium (2 oz) Product Code : 99908 Flash Glue Gap CA+ 200 Medium is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. Applications: Fast cure, general purpose cyanoacrylate used for bonding plastic, rubber, metal, wood, leather, fabric and composites. Substrates can be bonded to themselves or in various combinations. Useful hints/notes: Bond time is extremely fast, align parts prior to assembly. Content : 2 OZ	SGD$13.00

	Flash Glue Slow CA- 1000 Thick (2 oz) Product Code : 99912 Flash Glue Slow CA- 1000 Thick is the best gap filling thick viscosity CA for slow set times, so applications can be adjusted. Applications: Developed for the bonding of porous materials. Features include versatile bonding of most elastomers, metals and plastics. Useful hints/notes: On elastomer bonding and some plastics, residues or release agents on surfaces should be removed by solvent wipe. Content : 2 OZ	SGD$14.00

FOAM SAFE	Flash Glue Odorless CA+ 100 Foam Safe (10gm) Product Code : 99916 Flash Glue Odorless CA+ 100 Foam Safe is formulated for use by anyone sensitive to or allergic to standard CA. Use is recommended when sufficient ventilation is not possible. Applications: Typically used where cosmetic requirements indicate the need of a near invisible bond without the problem of blooming. It can also be used on certain foams. This is a user friendly product due to the low odor characteristics. Useful hints/notes: Bonding can be immediate, so careful, speedy alignment of parts is required. Be sure to always test on your substrate before use to assure compatability and remember less is more when applying. Content : 10 gms	SGD$7.00

FOAM SAFE	Flash Glue Odorless CA+ 100 Foam Safe (20gm) Product Code : 99917 Flash Glue Odorless CA+ 100 Foam Safe is formulated for use by anyone sensitive to or allergic to standard CA. Use is recommended when sufficient ventilation is not possible. Applications: Typically used where cosmetic requirements indicate the need of a near invisible bond without the problem of blooming. It can also be used on certain foams. This is a user friendly product due to the low odor characteristics. Useful hints/notes: Bonding can be immediate, so careful, speedy alignment of parts is required. Be sure to always test on your substrate before use to assure compatability and remember less is more when applying. Content : 20 gms	SGD$14.00

FOAM SAFE	Flash Glue Odorless CA- 1000 Foam Safe (10gm) Product Code : 99919 Flash Glue Odorless CA+ 100 Foam Safe is formulated for use by anyone sensitive to or allergic to standard CA. Use is recommended when sufficient ventilation is not possible. Applications: Typically used where cosmetic requirements indicate the need of a near invisible bond without the problem of blooming. It can also be used on certain foams. This is a user friendly product due to the low odor characteristics. Useful hints/notes: Bonding can be immediate, so careful, speedy alignment of parts is required. Be sure to always test on your substrate before use to assure compatability and remember less is more when applying. Content : 10 gms	SGD$7.00

FOAM SAFE	Flash Glue Odorless CA- 1000 Foam Safe (20gm) Product Code : 99920 Flash Glue Odorless CA+ 100 Foam Safe is formulated for use by anyone sensitive to or allergic to standard CA. Use is recommended when sufficient ventilation is not possible. Applications: Typically used where cosmetic requirements indicate the need of a near invisible bond without the problem of blooming. It can also be used on certain foams. This is a user friendly product due to the low odor characteristics. Useful hints/notes: Bonding can be immediate, so careful, speedy alignment of parts is required. Be sure to always test on your substrate before use to assure compatability and remember less is more when applying. Content : 20 gms	SGD$14.00

	Flash Glue RED High Strength Thread Locker (5gm) Product Code : 99930 Flash Glue Red High Strength Threadlocker is a single component, high strength (permanent) anaerobic thread locker. It cures when confined in the absense of air between close-fitting metal surfaces. Content : 5 gms Brush on Bottle	SGD$7.00

	Flash Glue BLUE Medium Strength Thread Locker (5gm) Product Code : 99931 Flash Glue Blue Medium Strength Threadlocker is a general purpose, medium strength thixotropic anaerobic thread locker. The product cures when confined in the absense of air between close-fitting metal surfaces. Content : 5 gms Brush on Bottle	SGD$7.00

	Lightning™ CA ACTIVATOR - Foam Safe Formula (2 oz with Pump) Product Code : 99926 A mild "Foam Safe" accelerator compatible with an array of cyanoacrylates. It will not attack foam, expanded polystyrene, styrofoam, and plastic. It will cause CA Glue to cure rapidly and will not generate heat or cause the glue to pop, crust, or turn white. Performs exceptionally on any surface that you use cyanoacrylate adhesives with. Content : 2 OZ with Pump	SGD$7.00

	Lightning™ CA ACTIVATOR - Foam Safe Formula (8 oz with Pump) Product Code : 99927 A mild "Foam Safe" accelerator compatible with an array of cyanoacrylates. It will not attack foam, expanded polystyrene, styrofoam, and plastic. It will cause CA Glue to cure rapidly and will not generate heat or cause the glue to pop, crust, or turn white. Performs exceptionally on any surface that you use cyanoacrylate adhesives with. Content : 8 OZ with Pump	SGD$16.00

	Thunder™ CA REMOVER (1 oz) Product Code : 99944 Thunder™ CA REMOVER is specially formulated for Flash Glue® Adhesives. It is a clear liquid with a relatively low evaporation rate that attacks and dissolves cured or uncured cyanoacrylates. Applications: Can be used to debond misaligned parts or clen up excess adhesives. It also is useful for removing spilled adhesives from work areas. Debonds cyanoacrylate from bonded skin. U seful hints/notes: Thunder™ CA REMOVER works best under repeated applications rather than one excessively large application. Apply debonder, allow it to dissolve hardened superglue and repeat as necessary. Use in an inconspicuous area for testing. May attack certain plastic which may result in removing it's paint or varnish. Content : 1 OZ Fine Applicator	SGD$7.00